一类Boltzmann & Darwin混合寻优策略的收敛特性研究

基于文［１］提出的求解组合最优化问题的Ｂｏｌｔｚｍａｎｎ＆Ｄａｒｗｉｎ混合寻优策略，本文进一步分析研究了Ｂｏｌｔｚｍａｎｎ＆Ｄａｒｗｉｎ混合寻优策略非时齐情形下的收敛特性，包括全局收敛性和收敛速度。结果表明，Ｂｏｌｔｚｍａｎｎ＆Ｄａｒｗｉｎ混合寻优策略的收敛特性优于模拟退火（ｓｉｍ－ｕｌａｔｅｄ ａｎｎｅａｌｉｎｇ）方法的收敛特性。     

输入——输出迭代算法中松弛因子的确定

本文利用变分的手段提示了输入—输出迭代算法中松弛因子的取值规律。     

混凝土结构非线性全过程分析中的迭代控制法研究

在深入研究各类迭代控制法的基础上，针对混凝土结构的非线性全过程分析，在常规的位移和弧长控制法中引入了简单适用的考虑路径搜寻和单因加速的方法，明显改善了收敛情况。     

Iterative finite element model of nonlinear viscoplastic analyses for blended granular porous media

The iterative finite element model, in which an element is used to represent a single particle, is generated to analyze the global behavior of multiple-material aggregates of materially nonlinear viscoplastic particles. The generalized Maxwell model is used to define four types of specific nonlinear viscoplastic materials, which are the elasto visco-plastic matter with linear viscosity, the plasto visco-plastic material with linear viscosity, the elasto visco-plastic media with nonlinear viscosity, and the plasto visco-plastic media with nonlinear viscosity. The theory and relevant penalty iterative algorithm are developed to analyze the four representative mixed granular systems consisting of materially nonlinear viscous particles. To verify precision of stress calculation, solutions of an axis-symmetric radial flow problem are compared with results of the literature and they are in a great agreement. The results present here provide significant insight into the fundamental behavior of granular media under compaction conditions, including prediction of the overall aggregates stress-strain response.     

Numerical Filling Simulation of Injection Molding Using Three-Dimensional Model

1 Introduction During injection moulding, the rheological response of polymer melts is generally non-Newtonian and nonisothermal with the position of the moving flow front. Because of these inherent factors, it is difficult to analyze the filling process. Therefore, simplifications usually are used. For example, in middle-plane technique and dual domain technique [1], because the most injection molded parts have the characteristic of being thin but generally of complex shape, the Hele-Shaw …     

瀑布沟工程的水文分析计算

本文简要的介绍了瀑布沟工程水文分析计算主要依据站的选定和基本资料的插补延长,以及径流、洪水的分析计算方法.在可行性研究阶段水文成果(通过审查)和新设立的毛头码水文站所取得的数年水文资料的基础上,将初设阶段对可行性研究阶段的水文分析计算方法和成果进行验证和补充的情况重点予以介绍.     

数控机床脉冲插补法与数字增量插补法之比较

介绍了数控机床脉冲插补法与数字增量插补法的基本原理,分析了各自的特点并指出了其各自的应用范围。     

降雨入渗过程的水-气二相流模型研究

本文根据多孔介质中水、气的质量守恒定律，结合多相流理论，建立了求解饱和-非饱和渗流的水-气二相流数学模型，并采用积分形式的有限差分法和NewtonRaphson迭代方法进行数值求解，提出了各种边界条件，包括水相、气相和降雨入渗边界的数学处理方法。利用上述模型对土柱试验进行模拟，将计算结果与试验数据比较，验证了模型的正确性；然后对土质边坡降雨入渗过程进行计算，得到孔隙水压力、孔隙气压力和毛细压力的变化过程，其变化规律符合实际，实现了降雨入渗的水-气二相渗流过程，为定量研究空气阻力对入渗水流的影响提供有效途径。     

基于电量时序特征的旁路代自动识别和代入算法

介绍了一种基于时序特征的电能量计量计费系统（TMR）的旁路代自动识别和代入算法。首先分析了现有TMR中的旁路代处理方式，指出这些处理方式的缺陷;然后通过分析TMR旁路代发生前后电量的时序特征，提出了一种基于电量时序特征的自动旁路代算法，此算法能在旁路代事件开始时即做出正确判断，并在适当的延时后开始完成旁路电量的自动代入。该算法在江苏省电力公司TMR中获得了很好的实验效果。     

Analysis and design of Hermite subdivision schemes

Published online: 14 May 2002